E538A-907

Unit Characteristics

High Temp +20°F BTU/h: 131445
Shipping Weight:
Series:
Category: Unit Cooler
Low Temp -20°F BTU/h: 94271
Length:
Height:
Fans:
Face Velocity:
DOE Compliant: DOE Compliant
Application Temp: L, M
Width: 27.625

Unit Characteristics

High Temp +20°F BTU/h131445
Shipping Weight
Series
CategoryUnit Cooler
Low Temp -20°F BTU/h94271
Length
Height
Fans
Face Velocity
DOE CompliantDOE Compliant
Application TempL, M
Width27.625


 

The Century Refrigeration E Series unit cooler, E538A-907, is a workhorse solution designed for diverse refrigeration needs. The E Series can be adapted for ceiling, rack, or floor mounting applications. (Please contact the factory for rack or floor mounting options.)
 

The E Series units can be equipped with CENTURY.CONNECT, our comprehensive remote monitoring package, allowing you to access your operational controls from anywhere in the world—simply find a signal on your handheld or laptop device.

 

General Applications:

  • Medium to large cooler and freezer applications
  • Large refrigerated warehouses and storage facilities
  • Distribution facilities

Cabinet Construction:

  • Heavy-gauge, rust-proof aluminum housing with a smooth finish
  • Corrosion-resistant hardware
  • Fully die-formed venturis to minimize noise and maximize airflow
  • Swing-out design with hinged fan and end panels, featuring lift-off hinges for easy access

Coil Construction:

  • Copper tubing
  • Full-collared die-formed aluminum plate fins and tube sheets (available in other materials upon request)
  • Tubes mechanically expanded into the fin pack for maximum heat transfer
  • Solder type distributors with removeable nozzles sized for the specified refrigerant and temperature range
  • Coils tested underwater at 350 PSIG
  • All coils require an external equalized expansion valve
  • E Series unit cooler coils are engineered to utilize multiple refrigerants (Refrigerant type must be specified when ordering)

Fan Motors:

  • Heavy duty, high-efficiency EC motors
  • Equipped with M12 electrical and signal connections for straightforward removal and installation
  • Permanently lubricated for reduced maintenance
  • Suitable for low-temperature applications
  • Internally thermal protected
  • Pre-wired to terminal blocks in the unit’s end panel
  • Suitable for single-point group fusing
  • Fan motors are IP54 rated

Fan Blades:

  • 20-inch, low sound profiled sickle-shaped composite blades
  • Mounted inside a full bell mouth housing
  • Includes a diffuser for increased volume flow rate and air throw

Defrost Designs:

  • Air Defrost: Suited for applications of +35°F room temperature and higher.
    • Available with 4, 5, 6, or 8 fins per inch arrangements
  • Electric Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4, 5, or 6 fins per inch arrangements
    • Low-watt density heaters internally housed in the coil for rapid and efficient defrost
    • Heaters are pre-wired terminal blocks in the unit’s end panel
    • Lower coil and drain pan heaters help provide fast and reliable condensate drainage
    • Standard heated and insulated drain pan
    • Adjustable defrost termination/fan delay switch
  • Hot Gas Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4, 5, or 6 fins per inch arrangements
    • Auxiliary side port connection on the distributor for hot gas connection
    • One ship-loose check valve for TXV bypass
    • Hot gas loop in the drain pan aids in fast and reliable condensate drainage
    • Standard heated and insulated drain pan
    • Adjustable defrost termination/fan delay switch

Air Throw:

  • Air throw ranges up to 200 feet at a 20-foot ceiling height for low sound and optimized fan options, reducing to 150 feet for ultra-low sound configurations (application dependent)

Certifications:

  • DOE Compliant, ETL Listed, NSF Certified

Contact your regional representative for other available options!
 

We reserve the right to change or revise the specifications and product designs associated with any features of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or replacements for equipment previously sold or shipped.