PFE528A-124-10

Unit Characteristics

High Temp +20°F BTU/h: 157561
Shipping Weight:
Series:
Category: Unit Cooler
Low Temp -20°F BTU/h: 109363
Length:
Height:
Fans:
Face Velocity:
DOE Compliant: DOE Compliant
Application Temp: L, M
Width: 39.25

Unit Characteristics

High Temp +20°F BTU/h157561
Shipping Weight
Series
CategoryUnit Cooler
Low Temp -20°F BTU/h109363
Length
Height
Fans
Face Velocity
DOE CompliantDOE Compliant
Application TempL, M
Width39.25


 

The Century Refrigeration PFE Series unit cooler, PFE528A-124-10, is engineered to withstand the demands of the industrial refrigeration market. The PFE Series is designed for ceiling or optional stacked floor mounting applications. (Please contact the factory for the stacked floor mounting option.)

 

The PFE Series units can be equipped with CENTURY.CONNECT, our comprehensive remote monitoring package, allowing you to access your operational controls from anywhere in the world—simply find a signal on your handheld or laptop device.

 

General Applications:

  • Blast coolers
  • Blast freezers
  • Warehouse storage and distribution facilities

Cabinet Construction:

  • Corrosion-resistant G-90 mill galvanized sheet metal
  • Insulated drain pans also feature G-90 mill galvanized sheet metal with a factory-supplied drain connection
  • Corrosion-resistant hardware
  • Fully die-formed venturis to minimize noise and maximize airflow

Coil Construction:

  • Copper tubing
  • Full-collared die-formed aluminum plate fins and galvanized tube sheets (available in other materials upon request)
  • Tubes mechanically expanded into the fin pack for maximum heat transfer
  • Solder type distributors with removeable nozzles sized for the specified refrigerant and temperature range
  • Available in six (6), eight (8), and ten (10) row configurations to suit various application needs
  • Coils tested underwater at 350 PSIG
  • All coils require an external equalized expansion valve
  • PFE Series unit cooler coils are engineered to utilize multiple refrigerants (Refrigerant type must be specified when ordering)

Fan Motors:

  • Industrial-duty, high-efficiency, three-phase voltage, full ball bearing design
  • Permanently lubricated for reduced maintenance
  • Suitable for low-temperature applications
  • Pre-wired to terminal blocks in the unit’s end panel

Fan Blades:

  • Heavy-duty airfoil cast aluminum blades with steel hubs
  • Statically and dynamically balanced for smooth operation
  • Selected for maximum airflow
  • 1 ½ HP capable of handling up to 0.25″ ESP
  • 3 HP capable of handling up to 0.5″ ESP

Defrost Designs:

  • Air Defrost: Suited for applications of +35°F room temperature and higher.
    • Available with 4 or 5 fins per inch arrangements
  • Electric Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4 or 5 fins per inch arrangements
    • Low-watt density heaters internally housed in the coil for rapid and efficient defrost
    • Heaters are pre-wired to terminal blocks in the unit’s end panel
    • Lower coil and drain pan heaters help provide fast and reliable condensate drainage
    • Standard heated and insulated drain pan
    • Adjustable defrost termination/fan delay switch
  • Hot Gas Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4 or 5 fins per inch arrangements
    • Auxiliary side port connection on the distributor for hot gas connection
    • One ship-loose check valve for TXV bypass
    • Hot gas loop in the drain pan aids in fast and reliable condensate drainage
    • Standard insulated drain pan
    • Adjustable defrost termination/fan delay switch

Air Throw:

  • Up to 170 feet at 20-foot ceiling height with 0.0″ ESP (application dependent)
  • Extended air throw distances available with optional nozzles

Certifications:

  • DOE Compliant, ETL Listed, NSF Certified

Contact your regional representative for other available options!
 

We reserve the right to change or revise the specifications and product designs associated with any features of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or replacements for equipment previously sold or shipped.