UFH838A-180

Unit Characteristics

High Temp +20°F BTU/h: 23740
Shipping Weight:
Series:
Category: Unit Cooler
Length:
Height:
Fans:
Face Velocity:
DOE Compliant: DOE Compliant
Application Temp: M
Width: 15.75

Unit Characteristics

High Temp +20°F BTU/h23740
Shipping Weight
Series
CategoryUnit Cooler
Length
Height
Fans
Face Velocity
DOE CompliantDOE Compliant
Application TempM
Width15.75


 

The Century Refrigeration UFH Series unit cooler, UFH838A-180, is a low-profile, flush ceiling mount solution designed for your refrigeration needs.

 

The UFH Series units can be equipped with CENTURY.CONNECT, our comprehensive remote monitoring package, allowing you to access your operational controls from anywhere in the world—simply find a signal on your handheld or laptop device.

 

General Applications:

  • Walk-in coolers and freezers
  • Smaller coolers and freezers
  • Beverage boxes
  • Produce storage

Cabinet Construction:

  • Heavy-gauge, rust-proof aluminum housing with a smooth finish
  • Corrosion-resistant hardware
  • Fully die-formed venturis to minimize noise and maximize airflow

Coil Construction:

  • Copper tubing
  • Full-collared die-formed aluminum plate fins and tube sheets (available in other materials upon request)
  • Tubes mechanically expanded into the fin pack for maximum heat transfer
  • Solder type distributors with removeable nozzles sized for the specified refrigerant and temperature range
  • Coils tested underwater at 350 PSIG
  • All coils require an external equalized expansion valve
  • UFH Series unit cooler coils are engineered to utilize multiple refrigerants (Refrigerant type must be specified when ordering)

Fan Motors:

  • EC, external rotor-motor that reduces power consumption
  • Permanently lubricated for reduced maintenance
  • Suitable for low-temperature applications
  • Internally thermal protected
  • Pre-wired to terminal blocks in the unit’s end panel
  • Suitable for single-point group fusing
  • IP54 rated

Fan Blades:

  • Aerodynamic polypropylene fan blade
  • Installed and balanced for maximum air throw and quiet operation
  • Selected for maximum airflow

Defrost Designs:

  • Air Defrost: Suited for applications of +35°F room temperature and higher.
    • Available with 4, 5, 6, or 8 fins per inch arrangements
  • Electric Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4, 5, or 6 fins per inch arrangements
    • Low-watt density heaters internally housed in the coil for rapid and efficient defrost
    • Heaters are pre-wired terminal blocks in the unit’s end panel
    • Lower coil and drain pan heaters help provide fast and reliable condensate drainage
    • Optional heated and insulated drain pain (standard on 5 and 6 fan models)
    • Standard fixed temperature defrost termination/fan delay switch with optional adjustable DTFD
  • Hot Gas Defrost: Suited for room temperature applications below +35°F. Operational design down to -40°F saturated suction temperature.
    • Available with 4, 5, or 6 fins per inch arrangements
    • Auxiliary side port connection on the distributor for hot gas connection
    • One ship-loose check valve for TXV bypass
    • Hot gas loop in the drain pan aids in fast and reliable condensate drainage
    • Standard insulated drain pan
    • Standard fixed temperature defrost termination/fan delay switch with optional adjustable DTFD

Air Throw:

  • 25 feet to 30 feet air throw at 20-foot ceiling height (application dependent)

Certifications:

  • DOE Compliant, ETL Listed, NSF Certified

Contact your regional representative for other available options!
 

We reserve the right to change or revise the specifications and product designs associated with any features of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or replacements for equipment previously sold or shipped.